513-874-7478
Superior Service, Value Pricing

B-Air

View as
Sort by
Display per page

B-Air FX-1 ETL Flex Mini-Air Mover

The Flex (#FX-1) is a powerful miniature air mover / dryer that gets into small spaces where average air movers cannot reach.

The Flex (FX-1) helps dry any small or difficult to reach space whether it be closets, under counters or into drop ceiling panels. Use the Cub's versatile design in 2 different angles, (horizontally or 90°) to allow air flow in the desired direction.
As with all B-Air products, the Cub is made of high quality materials to ensure many years of exceptional use.

$99.00

B-Air PB-25 ETL Polar Bear Axial Air Mover

 The Polar Bear axial air mover (PB-25) is engineered for maximum performance. The built-in adjustable feet allow the Polar Bear to be used at a level horizontal angle or to be positioned at a downward 18° angle for a more concentrated air-flow.

The ¼ HP motor in the Polar Bear delivers a powerful 3300 CFM while requiring minimal amperage draw (2.8 amps) when set on high. The Polar Bear is lightweight and compact and along with its weight balanced handle, the PB-25 can be carried with ease.

With an onboard GFCI outlet, the Polar Bear axial fan has all the tools for “Daisy Chain” connectivity and holds the highest safety marks for the United States and Canada through its C-ETL-US certification.

·         3300 CFM

·         2 speed, low amp draw (2.4/2.8)

·         Daisy-chain up to 5 units

·         On board GFCI protects the air mover and attached devices

·         Adjustable height feature – use it level or at a downward angle  

·         Hour meter  
MAY BE ORDERED IN BLUE, RED AND GREEN COLORS!

 

$359.00 $299.00

B-Air VG LGR 3000 Vantage LGR Dehumidifer

The B-Air Vantage LGR 3000 is the most effective dehumidifying and drying device available to restoration contractors. The Vantage LGR 3000 removes 170 pints per day @ AHAM / 38 gallons per day @ saturation - more water removal than any other refrigerant dehumidifier in its class. The Vantage LGR 3000's design and construction allows to automatically adjust making it run efficiently in almost any ambient temperature. The heat pump technology used in the Vantage LGR 3000 also allows the unit to defrost only when necessary and continue to produce water while in defrost mode. This increases performance substantially over all competitive dehumidifiers. With recessed wheels for tighter storage and maneuverability, rubberized bottom feet for non-slip secure handling and superior performance across the full range of conditions (33°F to 125°F) makes the B-Air Vantage LGR 3000 the clear choice for restorative professionals.

Call (513)874-7488 for information and ordering!

$2,799.00

B-Air VP-33 ETL Vent Centrifugal Air Mover

The B-Air Vent VP-33 was developed with the restoration contractor in mind – low amp, compact size and high CFM. The VP-33 is half the size of any air mover in its class.

The B-Air VP-33 delivers 2530 CFM while using only 2.9 amps. With its low amp draw and on-board GFCI outlet, the Vent VP-33 allows up to 4 units to be daisy chained to a single standard 15 amp household circuit.
The Vent’s multipurpose design allows it to be used at 3 different angles (horizontally, 45° and 90°) to allow air flow in the desired direction.

The B-Air Vent housing is constructed of an extremely durable rotationally molded plastic. The powerful 1/3 HP motor in the VP-33 is completely enclosed preventing moisture from entering and damaging the motor’s internal componentry. Like all B-Air restoration equipment, the Vent VP-33 is ETL certified for safety.

Due to its lightweight and compact size, the Vent is easy to carry and occupies less space when stored. With interlocking contact points at air intake grills and exhaust ports, the Vent line of air movers can safely and securely stack up to 4 units high. The built in sturdy handles on the Vent air movers not only serve as a proper power cord manager but can also be used to mount the Vent VP-33 in trucks and warehouse storage walls.
  
Call (513)874-7488 to place your order!
From $149.00

B-Air CDDK Duct Dryer Kit for Flex mini air mover

The B-Air Cub Duct Drying Kit is specifically designed for the Cub air mover (Model# CP-1). An 8ft., high-quality flexible vinyl hose easily attaches to the Cub air mover to provide ventilation of hard-to-reach places. An adjustable gate controls the amount of airflow.
$89.95

B-Air PB-RB Axial Air Mover Stand (Black)

B-Air PB-RB Axial Air Mover Stand (Black)Add 360° of versatility to your Polar Bear Axial Air Mover! When used with this easy-to-attach stand, your Polar Bear has the ability to dry in any direction! Dry ceilings, walls, floors and even upholstery. It’s an absolute necessity for any restoration contractor. Air Mover NOT included.
$94.95

B-Air PB-RS Axial Air Mover Stand (Stainless Steel)

B-Air PB-RS Axial Air Mover Stand (Stainless Steel)Add 360° of versatility to your Polar Bear Axial Air Mover! When used with this easy-to-attach stand, your Polar Bear has the ability to dry in any direction! Dry ceilings, walls, floors and even upholstery. It’s an absolute necessity for any restoration contractor. Air Mover NOT included.
$139.95