NITRO 600 AIR SCRUBBER

Nitro 600 Air Scrubber 

Medium duty negative air machine made from impact resistant polyethylene. Used in mold abatement, asbestos abatement, and lead abatement projects. Available accessories include activated carbon filters for removal of chemical fumes and biological contaminants. This equipment provides a cleaner and healthier environment in industrial facilities as well as abatement projects.

Performance:

Quiet and smooth operation with motorized impeller and variable speed control. Multiple units can be

operated stacked three high and four to five units can be daisy-chained on one 15 amp circuit. Air flow

with HEPA and primary/secondary filters installed is from 200 to 600 cfm, controlled by the variable

speed controller. Free airflow without filters is 1000 cfm and blower is capable of 3.35” WC static

pressure which extends the useful life of your filters.

Filtration:

Our standard final filter is HEPA 99.97% @ 0.3 micron efficiency, tested and certified. The primary/

secondary filter is dual density, MERV 8 with antimicrobial treatment - efficient and economical.

The NITRO 600, portable air filtration machine with impact resistant polyethylene housing and

performance you have learned to expect of OmniAire equipment. The NITRO 600 is UL/CSA listed for

your safety and to meet your high expectations and many project requirements.

Filtration:

Our standard final filter is HEPA 99.97% @ 0.3 micron efficiency, tested and certified. The primary/

secondary filter is dual density, MERV 8 with antimicrobial treatment - efficient and economical.

Optional filters for NITRO 600 could be combine with or replace our standard filters:

• Our economical Geo95 MERV 14 filter with solid plastic frame can replace HEPA filter for

non-hazardous dust contaminants. It has an unique design for high dust holding capacity and low air

flow resistance.

• OdorGuard 600 carbon filters for odors and vapors can be an addition to any particulate filter.

• Pleated MERV 11 high efficiency secondary filter installed in the door cavity.

Housing:

High density polyethylene plastic housing has sunrise orange/yellow color for visibility and is design for

high strength and smooth air flow. Polyethylene has UL 98HD flammability rating with UV inhibitor

for outdoor use. Polyethylene surface does not support bacterial growth and is easy to clean. Units stack

safely three high with interlocking design and have soft rubber handle for a comfortable grip. Interlocking

hinged door has a 3.5” deep compartment for variety of pre-filters to meet your job needs. Machine

has integral 10” diameter ring connections for flex hoses. While the NITRO weighs only 36 lbs, its’

walls are solid, the HEPA seal is consistent and our larger motorized impeller delivers higher flow. 

SPECIFICATIONS        

Airflow - 200-600 cfm 
     Airflows are based on blower manufacturer curves. Different HEPA filters may cause the
     flow to vary.  
Weight - 36 lbs
Dimensions - 18.5" wide 18.5" high 25" long
Cabinet - Flame Retardant Polyethylene
Filtration -
     Primary/Secondary Filter - Dual-ply Dustlok polyester pad
     Standard HEPA Filter - Metal Frame 99.97% Efficiency .3 micron
     Optional Filter - GEO95 MERV 14 Efficiency
     Optional - Carbon Filter for odor control
Power Requirement - 115 VAC/ 50-60 Hz 2.2 amps
Controls -
     Variable Speed Controller
     Change Filter Indicator Light
     Convenience GFI protected outlet
     12 amp circuit breaker
Outlet Ring Size - 10" diameter

CONFORMS TO UL

STD 507