The Phoenix Axial Air Mover is the industry's only air mover specifically engineered with patent pending FOCUS™ Technology. FOCUS Technology revolutionizes evaporative drying by producing CFM greater than competitive products and focusing those CFM's on hard-to-dry areas such as carpet and pad, sub-floor and walls.
Call (513)874-7488 for quantity pricing!
Phoenix Axial Air Mover The Phoenix Axial Air Mover is the industry’s only air mover specifically engineered with patent pending FOCUS™ Technology. FOCUS Technology revolutionizes evaporative drying by producing air velocities greater than competitive products and focusing those velocities on hard-to-dry areas such as carpet and pad, sub-floor and walls. The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, FCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box. Performance Greater air velocities than competitive products Focused velocities 0 to over 23.5 feet Directs air flow towards problematic corners, where the wall meets the floor Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage 3000 cfm Long-life 2-speed motor Low noise, quiet operation Packaging Lightweight and compact linear low density polyethylene (LLDP) housing is washable, chemical resistant and stacks for storage Colored Restoration Red for high visibility Ergonomic handle Features Power-on indicator light Automatic hour meter displays site run time On-board power management: Circuit breaker protects air mover and attached devices and prevents nuisance visits to the junction box GFCI protection promotes operator safety in wet applications Duplex AC outlet allows daisy chaining of up to four axial air movers 20 ft AC cord with cord management Units interlock for ease of stacking during storage and handling Weighs 2.5 lbs less than competitive units Phoenix Axial Air Mover Specifications Part No.: 4025200 Drive Motor: 1/4 hp 1-phase 110/120 VAC 2-speed 4-pole, PSC Electric Motor CFM: Approximately 3000 Cord: 20 ft Power Cord Outlet: 15A UL Rated GFCI Duplex Receptacle Current Draw: 2.5 Amps Voltage: 115 VAC Warranty: Year One - 100% parts and labor (all components); Year Two - 100% parts only (all components); Year(s) Three through Seven - Only materials and workmanship of the housing are covered Dimensions Machine Shipping Width: 19.9" 19.25" Height: 19.5" 20" Depth: 15.2" (intake to exhaust) 15.5" Weight: 29.5 lbs 32.7 lbs
Manufacturer: N/A
SKU: N/A